Milled – Ultra Golfing

Odyssey introduces Damascus milled putters with unique steel insert

admin — Tue, 05 May 2026 12:16:43 +0000

Odyssey’s Damascus milled putters blend layered steel inserts with AI design for firmer feel and more consistent speed.

Gear: Odyssey Damascus Milled #7 CH, #7 DB putters

Price: $699 eachSpecs: Milled stainless steel head with Damascus steel insert; blasted silver finish and counterbalanced SL90 steel shaftAvailable: April 28 (pre-sale), May 5 (in-stores)

Who it’s for: Golfers who prefer the sound and feedback of a milled putter and want a more premium, firmer feel with consistent ball speeds.

What you should know: Odyssey is introducing a limited-edition line built around a Damascus steel insert, combining layered metal construction with AI-designed face geometry to blend traditional feel with modern consistency.

The Deep Dive: There’s a certain expectation that comes with a milled putter. Players who gravitate toward them tend to want a firmer, more responsive strike and a sound that gives immediate feedback. Good or bad, these golfers want to feel and hear ever subtle difference from putt to putt.

With the Damascus Milled line, Odyssey is trying to give these discerning players what they want, but with a twist that’s equal parts old-world craftsmanship and modern engineering.

At the center of the design is a Damascus steel insert, which isn’t just there for visual appeal. The material is created by stacking 61 layers of two different steels that are pressed and rolled under high heat. As it is pulled and twisted a flowing, wave-like pattern in the metal, so no two inserts look exactly the same. The process of making Damascus steel dates back over 1,000 years and was first used to create knives and swords.

That visual uniqueness is part of the story, but it’s not the primary goal. The layered construction blends softer and firmer steels, which Odyssey uses to fine-tune the sound and feel. The result is a firmer, slightly louder sound at impact than many players expect from a fully milled design.

To help with consistency, Odyssey has applied its AI-designed face topology to the inner-facing side of the insert. Subtle contours are engineered to maintain ball speed on off-center strikes, which has been a focus across the company’s recent putter releases. The idea is to preserve the traditional feedback of a milled putter without giving up too much forgiveness.

Both models in the lineup, the #7 CH and #7 DB, feature the same head, but they are made for different stroke types. The #7 CH features a crank hosel with a full shaft of offset and moderate toe hang, making it a better fit for players who swing the putter on a slight arc. The #7 DB, with its double-bend shaft and face-balanced design, is aimed at golfers who have a straighter stroke.Beyond the insert, the rest of the look is designed to showcase precision. Each head is fully milled from stainless steel, and the blasted silver finish keeps the look understated, letting the face pattern do most of the visual work without becoming distracting at address.

The SL90 shaft includes 20 grams of counterbalance weight in the butt section to help stabilize your stroke and smooth out tempo.

Taken together, the Damascus Milled putters sit in a space that’s a little different from Odyssey’s mainstream offerings. They’re not trying to be the softest or the most forgiving option in the lineup. They are a far cry from the brand’s recent zero-torque offerings, too. Instead, they’re built for players who want a firmer, more traditional response but with a modern layer of consistency built in.

Source link

TAYLORMADE INTRODUCES FULLY FORGED MILLED GRIND 5 WEDGES

admin — Mon, 09 Mar 2026 07:48:57 +0000

TaylorMade has unveiled its latest line in the Milled Grind wedge family, Milled Grind 5 (MG5). The MG5 line features numerous proven TaylorMade technologies as well as several new updates designed to enhance feel, spin, versatility and overall performance.

MG5 wedges will be available for preorder on August 7 and at trusted retail outlets on September 4 for £179 / €229 TW Grind wedges will sell for £199 / €259

THERE’S FEEL. THEN THERE’S FORGED FEEL

Having spent countless hours with the best players in the world, the TaylorMade R&D team has learned that a wedge can never feel soft enough in their hands.

That’s why for the first time ever, MG5 wedges are fully forged from soft carbon steel. Not only does the forging process allow golfers to experience soft feel around the green where they need it most, it ensures consistency in the wedge from top to bottom.

The process starts with a billet of soft carbon steel that’s heated and bent into an L-shape. The piece then goes through a rough forging process where excess material is trimmed away, and the wedge begins to take shape.

Next comes precision forging where the cosmetics and the grind begin to form. From there, the grind, face, grooves and hosel are machined to ensure consistency and that each wedge comes out exactly as it was designed.

The final steps involve a slew of cosmetic detailing processes to round out the final product.

Compared to MG4, MG5 features refined leading-edge curvature and an updated top line blend for a more symmetric overall profile.

“Inspired by some feedback from Collin Morikawa, we set out to make the best feeling wedge TaylorMade has ever created. The best players will tell you having great feel around the greens is critical to having confidence in your short game… and to have the best feeling wedge, it needs to be forged.”

Matt Bovee, Director of Product Creation – Iron and Wedge

SAW-MILLED GROOVES

MG5 wedges are the first in the MG family to employ aggressive saw-milled grooves. The saw-milling process allows TaylorMade’s designers to come even closer to the legal limits of groove geometry.

Reengineered with ultra-tight tolerances, steeper walls and sharper radii, these grooves help MG5 produce more spin than previous MG generations.

SPIN RETENTION IN WET CONDITIONS

Like MG generations before, MG5 wedges utilise a RAW face finish and all-new continuous Spin Tread Technology to help golfers maintain spin and control in wet conditions.

The continuous Spin Treads act like all-weather tires on a road as they redirect water away from the face and increase friction at impact.

With Spin Tread Technology working in concert with the saw-milled grooves, MG5 retains 13% more spin than MG4 in wet conditions. These technologies also maintain a more consistent launch angle between wet and dry conditions.

MORE GRIND OPTIONS FOR MORE GOLFERS

MG5 wedges feature six different Tour-inspired grinds that were crafted by TaylorMade master wedge craftsman Greg Cesario to give golfers a wide array of options to fit their game.

Three of those grinds fit TaylorMade’s standard bounce profile that the majority of golfers gravitate toward: the SB, SC and SX grinds.

SB GRIND

The SB grind features a full sole design with constant trailing edge relief for smooth and consistent turf interaction that’s compatible with most swing types.

This grind’s gentle four-way camber allows for increased versatility for golfers that like to manipulate the face.

Additionally, the increased sole width provides an added layer of forgiveness, especially for golfers with steeper swings. Most golfers will find this wedge beneficial in virtually all turf conditions.

SC GRIND

The SC grind is TaylorMade’s signature mid-bounce grind and has quickly become the preferred grind amongst staff club professionals.

The medium-low bounce design with added camber in the middle of the sole also features distinct heel, toe and trailing edge relief.

The result is a grind that’s crafted for ultimate greenside versatility in all turf conditions for players that like to manipulate the face, while providing consistent full-shot stability at the same time.

SX GRIND

A new grind in the MG family, the SX grind features the widest sole and utilises increased curvature to provide consistent turf interaction and performance out of the bunker.

The reverse-C trailing edge provides relief which keeps the bounce consistent as golfers manipulate the face.

This grind is ideal for golfers looking for the ultimate blend of stability and versatility.

“For the first time in my career, the MG5 lineup of wedges represents the closest thing to the perfect array of grinds, shapes, feel and spin in one package that I’ve seen in over 45 years.”

Greg Cesario, TaylorMade Wedge Master Craftsman

In addition to the three standard bounce options, the MG5 line also includes three additional grinds for golfers looking for specialised performance.

HB GRIND

The HB grind is crafted for golfers with steeper swings or that play in soft conditions. Its high-bounce design provides stability and forgiveness.

At the same time, unique heel relief and the tapered trail edge allow for plenty of versatility, and for the wedge to exit the turf quickly without digging.

LB GRIND

The LB grind features minimal bounce and allows the leading edge to sit close to the ground. The modified C-grind emphasises this address orientation, especially when the face is in an open position.

The pronounced beveled leading edge and added camber prevent the leading edge from digging. This grind is perfect for golfers with shallow swings and those that play in tight, firm conditions.

TW GRIND

The TW grind has been updated to reflect Tiger’s most current desires in a wedge. This grind features additional camber, and a new leading-edge blend into the sole for increased effective bounce and less heel relief in the 60° compared to the original TW grind.

“For my entire career, I’ve been a universal player, and that’s been reflected in my wedge setup. Over the years, I’ve specifically honed in on grind profiles that allow me to execute all the shots I need in all different conditions. The MG5 TW grind allows me to do exactly that.”

Tiger Woods

Source link

MIZUNO UNVEILS NEXT GENERATION MILLED PUTTER LINE

admin — Tue, 27 Jan 2026 18:06:50 +0000

A thicker sole structure in the heel and toe enhances rigidity, refining both the sound and feel through impact and removing any trace of metallic resonance. The result is a putter that embodies classic proportions yet feels entirely modern in feedback and flow.

Defined by its refined mid-mallet silhouette, the Osaka (available in plumber and slant-neck configurations) blends traditional shaping with contemporary stability.

Its shorter heel-toe length and wide blade stance provide visual stability at address, instilling confidence before every stroke. Perimeter weighting provides enhanced MOI, while subtle toe hang options allow players to select their preferred release profile.

The Osaka’s balanced proportions and deep milling deliver the crisp, satisfying sound and roll that Mizuno’s tour staff demanded, a model equally suited to both blade and mallet players seeking assured stability without sacrificing feel.

Driven by Mizuno’s extensive sound and vibration analysis, the Nagoya introduces the Roll-Up Cavity, a geometry designed to minimise sole displacement at impact while amplifying resonance control.

Available in a slant or double-bend neck, this unique structure produces a denser, more solid strike and an ultra-stable roll. Enhanced perimeter weighting further increases MOI, while the refined mass distribution delivers a truer sensation through the stroke, the culmination of years of acoustic and structural study.

Nagoya and Tokyo Range

Completing the family, the Tokyo showcases Mizuno’s Channel Wing design, a sculpted cavity that blends aerodynamic form with exceptional rigidity. Like the Nagoya, its geometry is tuned through sound analysis to eliminate unwanted frequencies and the metallic ‘ting’ found in earlier OMOI prototypes.

Also available in slant or double-bend, the Tokyo’s more compact profile appeals to purists seeking precision and feedback in a shape that frames the ball cleanly and promotes a natural, repeatable stroke.

Every putter in the series is available in two premium finishes—Grey Ion or Nickel—each chosen to complement the head shape and provide a refined, durable aesthetic that matches Mizuno’s meticulous standards.

The 2026 M.CRAFT series represents more than an evolution; it is a return to Mizuno’s roots in sound-tuned engineering and forged precision.

Each head is shaped, weighted, and milled in Japan to create a true sensory connection between player, putter, and performance.

Together, the Kyoto, Osaka, Nagoya, and Tokyo models mark a new era of Mizuno craftsmanship, built on the belief that the truest measure of feel is not only what you sense through your hands, but what you hear in the strike.

Source link